With Adrena v20 and newer, it is possible to display and log the data from the hydrogenerators RS485 bus.
1. Each converter must be connected to the computer thanks to RS485 USB adapters and the drivers must be installed.
Check in Device Manager > Ports (COM & LPT) > FTDIXXX > Properties > Port Settings > Advanced...
the box " serial enumerator " must be unchecked
2. Remember the COM port number of the hydrogenerator, as we will use it in following step
3. Reboot the computer when asked
4. Launch Adrena, go in General Settings > Links > Links energy and configure as following
5. Once it's done, you should be able to display hydrogenerator data with same way than other data
Comments
0 comments
Article is closed for comments.